GBC003 by NOCO: HD Precision clamps for Boost GB20, GB40, GB50 and GBX45

A set of HD Precision clamps with a Boost connector for four specific NOCO jump starters. Fine tips and a silicone lead that stays supple in the cold.

For GB20, GB40, GB50 and GBX45 | 40% wider jaw opening | 8 AWG silicone cable | 30 cm to the connector

Free quote, no obligation

Request a quote for your GBC003 by NOCO: HD Precision clamps for Boost GB20, GB40, GB50 and GBX45

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

GBC003 by NOCO: HD Precision clamps for Boost GB20, GB40, GB50 and GBX45

Will these fit my NOCO jump starter? Only if it is a Boost GB20, GB40, GB50 or a Boost X GBX45: those are the four models NOCO lists them for. They are meant for 12 V petrol and diesel engines.

The slim tips get onto top-post, side-post, small or oversized terminals, and the jaws open 40% wider than the brand's earlier HD clamps. They are all-metal, so they carry current without melting or smoking.

The 8 AWG silicone lead stays flexible in winter and runs 30 cm from the clamps to the Boost connector.

Before you order, check

  • ›  Read your jump starter's model on its label: GB20, GB40, GB50 or GBX45.
  • ›  They are not listed for the GBX55, GBX75, GBX155 or GB70 and up.
  • ›  Your vehicle must be 12 V.
  • ›  If your model is not on the list, call us before ordering.

Features

  • ›  Fit the NOCO Boost GB20, GB40, GB50 and Boost X GBX45
  • ›  Fine-tip profile for top, side, small or oversized posts
  • ›  Open 40% wider than NOCO's previous HD clamps
  • ›  All-metal build for high current transfer
  • ›  30 cm of heat-stabilised 8 AWG silicone cable

Technical data

CompatibilityNOCO Boost GB20, GB40, GB50, Boost X GBX45
Application12V petrol and diesel engines
Cable gauge8 AWG, silicone
Cable length30 cm (12")
ConstructionAll metal
ConnectionBoost connector

  • Brand
  • Reference
    TB-NOCO-GBC003
  • EAN13
    0046221190144
  • MPN
    GBC003

noco-gbc003-ficha-tecnica.pdf

Download (834.9KB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Loading...
Back to top