GC001 by NOCO: X-Connect clamps with M6 eyelet terminals for GENIUS
Two ways to hook up your GENIUS: micro clamps for occasional charging, or M6 eyelets bolted to the terminal.
3.2 cm micro clamps | M6 eyelet terminals | Built-in 20 A fuse | 16 AWG copper cable
GC001 by NOCO: X-Connect clamps with M6 eyelet terminals for GENIUS
Broke the clamps on my GENIUS, will these do? If your charger uses the X-Connect plug, yes: the GC001 works with the GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2X2 and GENIUS2X4, and the older G series (G750, G1100, G3500, G4 and G7200).
You get two options in one: fine-tip micro clamps with a 3.2 cm opening for occasional use, or M6 (6 mm) eyelets that stay fitted to the battery. The 16 AWG copper cable has a 20 A fuse, and the connector releases quickly while keeping out dirt, water, petrol and oil. Hex screws and key included.
Before you order, check
- › Make sure your charger has an X-Connect output.
- › Check the battery post: M6 eyelets. For M10, see the GC014.
- › If you only want a fixed lead, the GC002 eyelets are enough.
- › Not sure which to get? Call us and we will confirm.
Features
- › Suit the GENIUS1, 2, 5, 10, 2X2 and 2X4, plus G750, G1100, G3500, G4 and G7200
- › Fine-tip micro clamps, 3.2 cm opening
- › M6 (6 mm) eyelet terminals for fixed installation
- › 20 A fuse, over-moulded strain reliefs, 16 AWG copper
- › 47 cm overall, 0.12 kg
In the box
- › X-Connect micro battery clamps
- › M6 eyelet terminals
- › Hex screws
- › Hex wrench
Technical data
| Compatibility | GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2X2, GENIUS2X4, G750, G1100, G3500, G4, G7200 |
|---|---|
| Connector | X-Connect female |
| Cable gauge | 16 AWG |
| Fuse | 20 A |
| Overall length | 47 cm |
| Clamp span | 3.2 cm |
| Eyelet terminals | M6 (6 mm) |
| Weight | 0.12 kg |
-
Brand
-
ReferenceTB-NOCO-GC001
-
EAN130046221100549
-
MPNGC001