• New
NOCO XDS3B · 3-in-1 Qi2 25W stand | telebaterias.com

XDS3B by NOCO: XGRID 3-in-1 Qi2 wireless charging stand, black

NOCO

The upright version of the 3-in-1 pad: the iPhone stands vertical and visible while charging, with the watch and earbuds alongside.

iPhone upright, up to 25 W | Works with StandBy mode | Watch and AirPods at 5 W | 45 W supply and 2 m cable

Free quote, no obligation

Request a quote for your XDS3B by NOCO: XGRID 3-in-1 Qi2 wireless charging stand, black

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

XDS3B by NOCO: XGRID 3-in-1 Qi2 wireless charging stand, black

Want to see the iPhone screen while it charges on the bedside table? That is what the XDS3B is for: a stand that holds the iPhone upright on a Qi2 magnetic charger of up to 25 W, MagSafe compatible and StandBy ready. Below, the Apple Watch (5 W, MFi certified) and AirPods or another Qi device (5 W) charge too: 35 W across the three.

It has an alignment LED with foreign object detection and a weighted die-cast metal chassis. Takes Qi2/MagSafe cases up to 3 mm.

Includes a 45 W USB-C PD adapter, a 2 m USB-C cable (60 W) and a quick-start guide.

Before you order, check

  • ›  For 25 W, your iPhone must support Qi2 or MagSafe.
  • ›  Case: Qi2/MagSafe compatible and 3 mm at most.
  • ›  It needs a USB-C PD source of 45 W or more: one is in the box.
  • ›  If you want it flat, the XDP3B pad does the same.
  • ›  Questions? Call us before ordering.

Features

  • ›  Charges three devices at once, 35 W wireless
  • ›  Qi2 magnetic stand up to 25 W for iPhone, MagSafe compatible
  • ›  iPhone StandBy mode while charging
  • ›  Apple Watch at 5 W (MFi) and 5 W Qi zone for AirPods
  • ›  Weighted die-cast metal; alignment LED and foreign object detection

In the box

  • ›  XDS3 wireless charging stand
  • ›  45W USB-C power adapter
  • ›  2 m USB-C cable (60W)
  • ›  Quick start guide
  • ›  Safety and warranty information

Technical data

iPhone output25W max (magnetic Qi2, MagSafe compatible)
Apple Watch output5W max
Qi output (AirPods)5W max
Total wireless output35W
Stand input45W (15V, 3A) USB-C PD
Adapter input100-240V~, 50-60 Hz, 1.0A
Adapter output45W max, USB-C PD 3.1 (5/9/12/15V 3A, 20V 2.25A, PPS 5-11V 4.05A)
CableUSB-C, 2 m, 60W, PD 3.1, 480 Mbps
Maximum case thickness3 mm (Qi2/MagSafe compatible)
Operating temperature0 to 40 °C
Storage temperature-20 to 70 °C
ColourBlack
Weight0.95 kg
Dimensions152 x 151 x 130 mm
Power adapter100-240 V~ 50-60 Hz, output USB-C PD 45 W

  • Brand
    NOCO
  • Reference
    TB-NOCO-XDS3B
  • MPN
    XDS3B

noco-xds3b-ficha-tecnica.pdf

Download (1.66MB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Back to top