Motorcycle battery 12.60Ah 12V 155A · Fulbat FB12A-A


Fulbat

Battery for a motorcycle? We confirm it over the phone

At telebaterias.com the FULBAT FB12A-A ships from our own stock

Technical data of the FULBAT FB12A-A 12.60Ah 155A 12V battery:

Battery Fulbat FB12A-A 12.60Ah 155A 12V Motorcycle Dry
VOLTAGEAHCCADIMENSIONSPOSITIVE TERMINAL
12V12.60Ah155A134x80x160[+ -]
Buy at telebaterias©: order online or by phone, model confirmed before it ships
Fast delivery from our own stock

  • Fulbat FB12A-A

  • Motorcycle battery

  • FULBAT MOTORCYCLE DRY

  • FULBAT

  • FB12A-A

  • 12 V

  • 12.60Ah

  • 155A

  • 134x80x160

  • PLOMO/ACIDO

Share

Frequently Asked Questions

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

Fulbat

Battery FULBAT FB12A-A 12.60Ah 155A 12V Motorcycle DRY

Order it your way: two clicks or one phone call, and we confirm it is the right one.

⚡ Capacity
12.60Ah
🔌 Voltage
12V
❄ Cold cranking (CCA)
155A
📐 Dimensions (mm)
134 × 80 × 160

The brand

Fulbat has manufactured in France since 1978 and its ground is motorcycles and light vehicles.

Two traits define it: it covers most of the car park with a short, clear range and works only with sealed, non-spillable batteries.

In practice, choosing Fulbat for motorcycles and light vehicles means going with a maker that has spent 48 years building this exact kind of battery, to the naming and the dimensions the trade takes as standard.

The range

It belongs to the Motorcycle DRY range, aimed at a motorcycle. In build terms, open lead-acid, the classic serviceable build.

Compatible applications

  • MOTO

This model

It delivers 12.60Ah with 155A cold cranking in a 134×80×160 mm case, positive terminal on the left.

Will it fit?

134 mm
Length
80 mm
Width
160 mm
Height

Technical detail

BrandFULBAT
ModelMotorcycle DRY
Part no.FB12A-A
Capacity12.60Ah
Voltage12V
Cold cranking (CCA)155A
TechnologyPLOMO/ACIDO
Dimensions (mm)134x80x160
Weight3.98 kg
Positive terminalPositivo Izquierda

  • Brand
  • Reference
    TB-FULBAT-FB12A-A
  • MPN
    FB12A-A
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture
Loading...
Back to top