XGC4 by NOCO: 56W mains charger for Boost GB70, GB150, GB250, GB251 and GB500

A high-efficiency 56 W power adapter for NOCO's larger Boost units with an XGC input. 152 cm output lead.

56 W output | For GB70, GB150, GB250+, GB251+, GB500+ | Connects to the XGC input | 152 cm DC lead

Free quote, no obligation

Request a quote for your XGC4 by NOCO: 56W mains charger for Boost GB70, GB150, GB250, GB251 and GB500

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

XGC4 by NOCO: 56W mains charger for Boost GB70, GB150, GB250, GB251 and GB500

What do I charge my GB150 or GB500 with? With the XGC4: it is the 56 W adapter NOCO specifies for the Boost GB70, GB150, GB250+, GB251+ and Boost MAX GB500+, and it plugs into the jump starter's XGC input. NOCO says it charges up to five times faster than a traditional 2 A USB charger.

It is a high-frequency, high-efficiency supply with a universal input, ideal to keep in the garage or at home. The lead to the jump starter is 152 cm; the unit weighs 0.37 kg and measures 113 x 57 x 39 mm.

Before you order, check

  • ›  Make sure your jump starter has an XGC input (GB70, GB150, GB250+, GB251+ or GB500+).
  • ›  Boost X models with USB-C (GBX45 to GBX155) use the U65 or GBC011.
  • ›  The GB20, GB40 and GB50 are not on its list.
  • ›  If in doubt, call us and we will check your model.

Features

  • ›  Compatible with the NOCO Boost GB70, GB150, GB250+, GB251+ and Boost MAX GB500+
  • ›  High-frequency power supply with 56 W output
  • ›  Connects through the jump starter's XGC input
  • ›  Up to 5 times faster than a 2 A USB charger, according to NOCO
  • ›  152 cm DC lead (16 AWG); 0.37 kg

In the box

  • ›  XGC4 power adapter

Technical data

CompatibilityNOCO Boost GB70, GB150, GB250+, GB251+, GB500+
Output power56 W
Jump starter connectionXGC input
InputUniversal
Weight0.37 kg
Dimensions113 x 57 x 39 mm
Input voltage100-240 V AC, 50-60 Hz
AC cable length152 cm
DC cable length152 cm
Cable gauge16 AWG

  • Brand
  • Reference
    TB-NOCO-XGC4
  • EAN13
    1210000617309
  • MPN
    XGC4

noco-xgc4-ficha-tecnica.pdf

Download (944.12KB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Loading...
Back to top