• New
ABSAAR Atek 4000: 6/12V charger | telebaterias.com

Atek 4000 by ABSAAR: automatic charger 6/12V 4A (AB104-200)

ABSAAR

ABSAAR Atek 4000 charger for 6 V or 12 V batteries from 5 to 120 Ah, with 4 A. Automatic: it cuts off once the battery is charged and includes a maintenance mode.

6/12 V · 4 A | 5–120 Ah | Automatic, with maintenance mode | Lead-acid, AGM, GEL and Ca/Ca | 1 kg

Free quote, no obligation

Request a quote for your Atek 4000 by ABSAAR: automatic charger 6/12V 4A (AB104-200)

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

Atek 4000 by ABSAAR: automatic charger 6/12V 4A (AB104-200)

What if my battery is GEL? No problem: it takes lead-acid, AGM, GEL and calcium (Ca/Ca), always from 5 to 120 Ah at 6 V or 12 V.

It is automatic: it cuts off when it detects a charged battery and offers a maintenance mode. Besides lead-acid, AGM and GEL, its data sheet lists calcium (Ca/Ca) batteries.

Another option from the same brand: the PRO4.0, with 4 A for batteries up to 95 Ah at 6 V or 12 V. It weighs 1 kg and measures 280 × 180 × 60 mm.

Before you order, check

  • ›  Check your battery voltage: this unit works at 6 V or 12 V.
  • ›  Capacity: find the Ah on the label; this charger covers batteries from 5 to 120 Ah.
  • ›  Check the battery type: it accepts lead-acid, AGM, GEL and calcium (Ca/Ca).
  • ›  If your battery is calcium (Ca/Ca), that type is on its data sheet too.
  • ›  Want to be certain? One call and we will tell you whether this charger suits your battery.

Features

  • ›  Operating voltage: 6 V and 12 V.
  • ›  Charging current of 4 A.
  • ›  Capacity range: from 5 to 120 Ah.
  • ›  Technologies listed on its data sheet: lead-acid, AGM, GEL and calcium (Ca/Ca).
  • ›  Automatic: it cuts off once the battery is charged and includes a maintenance mode.
  • ›  Size 280 × 180 × 60 mm, weight 1 kg.

Technical data

TypeBattery charger
Voltage6 V / 12 V
Charging current4 A
Suitable batteries5-120 Ah
Dimensions (L × W × H)280 × 180 × 60 mm
Weight1 kg
EAN4045365112803

  • Brand
    ABSAAR
  • Reference
    TB-ABSAAR-Atek 4000 4AMP 6/12V AB104-200
  • EAN13
    4045365112803
  • MPN
    Atek 4000 4AMP 6/12V AB104-200
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Back to top