GENIUS2D by NOCO: 12V 2A direct-mount charger for lead-acid batteries

Screw it down near the battery and leave it there: 12 V, 2 A, for lead-acid batteries up to 40 Ah, with no buttons or modes to pick.

Fixed mounting with bracket | 12 V, 2 A, lead-acid | Full charge up to 40 Ah | Automatic, no mode selection | IP65, -20 to +60 °C

Free quote, no obligation

Request a quote for your GENIUS2D by NOCO: 12V 2A direct-mount charger for lead-acid batteries

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

GENIUS2D by NOCO: 12V 2A direct-mount charger for lead-acid batteries

Can I leave it fitted in my boat, motorhome or truck? That is exactly the idea: the GENIUS2D comes with a bracket and two screws to fix it beside the battery, plus 61 cm AC and DC cables, the DC one with ring terminals.

What about my battery? It needs to be 12 V lead-acid: flooded, gel, MF, EFB, AGM or calcium. It fully charges up to 40 Ah and maintains anything larger. Lithium and 6 V batteries are not supported.

Nothing to press: it starts as soon as battery and mains are connected, can stay plugged in 24/7, detects batteries from 1 V and adjusts to temperature. It works from -20 to +60 °C.

Before you order, check

  • ›  Your battery must be 12 V lead-acid: lithium and 6 V are out.
  • ›  Capacity: full charge up to 40 Ah; a half-discharged 24 Ah battery takes about 6 h.
  • ›  Mounting space: it measures 127 x 58 x 38 mm and the cables are 61 cm.
  • ›  Need lithium or 6 V? Look at the GENIUS2 (6/12 V, 2 A).
  • ›  Unsure about your setup? Call us and we will confirm whether the GENIUS2D fits.

Features

  • ›  12 V, 2 A (28 W) charger for permanent installation.
  • ›  12 V lead-acid only: flooded, gel, MF, EFB, AGM and calcium.
  • ›  Full charge up to 40 Ah; maintains batteries of any size.
  • ›  Fully automatic, no mode selection.
  • ›  Detects batteries from 1 V and compensates for ambient temperature.
  • ›  IP65 housing; operates from -20 to +60 °C.
  • ›  61 cm AC cable and 61 cm DC cable with ring terminals.
  • ›  LEDs for charge, temperature and polarity error; bracket and 2 screws included.

In the box

  • ›  GENIUS2D battery charger
  • ›  Mounting bracket
  • ›  2 self-tapping screws
  • ›  User guide and warranty

Technical data

Mains input voltage100-240 VAC, 50-60 Hz
Working voltage (AC)90-264 VAC, 50-60 Hz
Output power28 W max.
Efficiencyapprox. 87%
Charging current2 A (12 V)
Battery voltage12 V
Battery chemistriesLead-acid (wet, gel, MF, calcium, EFB, AGM)
Battery capacityUp to 40 Ah; maintains all battery sizes
Charging modesAutomatic (no mode selection)
Low-voltage detection1 V
Back current drain< 0.5 mA
Operating temperature-20 °C to +60 °C
Housing protectionIP65
CoolingNatural convection
CablesAC: 61 cm · DC: 61 cm with eyelet terminals
MountingMounting bracket and 2 self-tapping screws
Approx. charging time (50% depth of discharge)8 Ah: 2 h · 12 Ah: 3 h · 24 Ah: 6 h · 40 Ah: 10 h
Dimensions (L x W x H)127 x 58 x 38 mm
Weight0.23 kg

  • Brand
  • Reference
    TB-NOCO-GENIUS2DEU
  • EAN13
    1210000618146
  • MPN
    GENIUS2DEU

noco-genius2deu-ficha-tecnica.pdf

Download (1.9MB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Viewed products

Loading...
Back to top