• New
GEN5X2 by NOCO, 2-bank on-board | telebaterias.com
GEN5X2 by NOCO, 2-bank on-board | telebaterias.com
GEN5X2 by NOCO, 2-bank on-board | telebaterias.com
GEN5X2 by NOCO, 2-bank on-board | telebaterias.com
GEN5X2 by NOCO, 2-bank on-board | telebaterias.com

GEN5X2 by NOCO: 2-bank on-board charger, 12V 10A (5A per bank)

NOCO

Two 12 V batteries on board? The GEN5X2 charges each one separately at 5 A from a single sealed IP68 unit bolted into the boat.

2 banks of 5 A (10 A total) | Up to 120 Ah per bank | Isolated, independent banks | Sealed IP68 housing

Free quote, no obligation

Request a quote for your GEN5X2 by NOCO: 2-bank on-board charger, 12V 10A (5A per bank)

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

GEN5X2 by NOCO: 2-bank on-board charger, 12V 10A (5A per bank)

Can one charger look after both batteries on my boat, say the starting and the house battery? Yes. The GEN5X2 has 2 isolated banks that work independently, each delivering 5 A (10 A in total) to 12 V batteries of up to 120 Ah apiece.

What if one is lithium and the other lead-acid? Each bank accepts lead-acid (wet, gel, MF, calcium, EFB, AGM) or 12 V lithium with a BMS, with its own 12V, AGM, lithium and repair modes. It is sealed to IP68, mounts in any orientation and can stay connected permanently.

Before you order, check

  • ›  All your batteries are 12 V.
  • ›  How many there are: 2 banks here; the GEN5X1 covers 1 and the GEN5X3 covers 3, all at 5 A per bank.
  • ›  Each battery’s capacity: up to 120 Ah per bank; for more, the GENPRO10 series gives 10 A and reaches 230 Ah.
  • ›  The mounting space: it measures 163 × 119 × 53 mm and weighs 1.89 kg.
  • ›  If you are unsure which one you need, call us and we will confirm the model.

Features

  • ›  2 isolated, independent banks of 5 A each (10 A total).
  • ›  12 V batteries up to 120 Ah per bank.
  • ›  Handles lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12 V lithium with BMS, LiFePO4 included.
  • ›  12V, AGM, lithium, repair and force modes; detects batteries from 1 V.
  • ›  Temperature compensation based on ambient conditions.
  • ›  Sealed to IP68, -20 °C to +40 °C, mounts in any position.
  • ›  145 W output power; 100-240 VAC input.

In the box

  • ›  GEN5X2 on-board charger
  • ›  2 x #8 27 mm self-tapping screws
  • ›  User guide and warranty

Technical data

Mains input voltage100-240 VAC, 50-60 Hz
Output power145 W max.
Charging banks2
Current per bank5 A (12 V)
Total charging current10 A
Battery voltage12 V
Battery chemistriesLead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4)
Battery capacityUp to 120 Ah per bank; maintains all battery sizes
Charging modes12V, 12V AGM, 12V Lithium, Repair and Force
Low-voltage detection1 V (Force Mode: 0 V)
Back current drain< 0.5 mA
Operating temperature-20 °C to +40 °C
Housing protectionIP68
CoolingNatural convection
DC cable lengthapprox. 1.83 m
Approx. charging time (50% depth of discharge)20 Ah: 3 h · 40 Ah: 6 h · 100 Ah: 15 h · 120 Ah: 18 h
Dimensions (L x W x H)163 x 119 x 53 mm
Weight1.89 kg

  • Brand
    NOCO
  • Reference
    TB-NOCO-GEN5X2
  • MPN
    GEN5X2

noco-gen5x2-ficha-tecnica.pdf

Download (2.32MB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Back to top