• New
GX2440 NOCO · 24V 40A industrial charger | telebaterias.com

GX2440 by NOCO: 24V 40A industrial charger for traction batteries, IP66

NOCO

A 24V, 40A charger for electric work and leisure vehicles, with an IP66 aluminium housing that mounts on or off the vehicle.

24V · 40A · 960W | 55 to 425Ah batteries | Lead-acid and lithium-ion | IP66 aluminium housing | Detachable AC and DC cables

Free quote, no obligation

Request a quote for your GX2440 by NOCO: 24V 40A industrial charger for traction batteries, IP66

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

GX2440 by NOCO: 24V 40A industrial charger for traction batteries, IP66

Will it work with my 24V golf buggy or pallet truck? If the bank is 24V and between 55 and 425Ah, yes. The GX2440 charges at 40A from 960W, handling deep-cycle lead-acid (flooded, gel, MF, EFB, AGM, calcium) and lithium-ion, LiFePO4 included. Scissor lifts, floor scrubbers and utility vehicles are covered too.

Can it stay fitted to the vehicle? Yes: it mounts on board or off board, and the one-piece IP66 aluminium housing shrugs off water, knocks and UV.

Modes include NORM, COLD/AGM, AGM+, LI-ION, repair and power supply (27.2V / 20A), with detachable AC and DC cables plus inhibit and remote LED ports.

Before you order, check

  • ›  The vehicle bank is 24V. For 36V see the GX3626; for 48V, the GX4820.
  • ›  Its capacity sits between 55 and 425Ah.
  • ›  Chemistry: deep-cycle lead-acid or lithium-ion (LiFePO4).
  • ›  Connection: the DC cable ends in ring terminals, not clamps.
  • ›  Not sure of your bank voltage? Call us and we will confirm the model before you order.

Features

  • ›  40A charging current for 24V batteries, 960W output.
  • ›  Recommended capacity 55 to 425Ah; maintains batteries of any size.
  • ›  Deep-cycle lead-acid (flooded, gel, MF, EFB, AGM, calcium) and lithium-ion, LiFePO4 included.
  • ›  Modes: NORM 28.8V, COLD/AGM 29.4V, AGM+ 31.2V, LI-ION 29.2V and repair 32V.
  • ›  Power supply mode at 27.2V and 20A.
  • ›  One-piece IP66 aluminium housing; on-board or off-board mounting.
  • ›  Detachable 1.93 m AC and DC cables; inhibit port with 20A relay.
  • ›  100-240 VAC input; 304 x 215 x 100 mm, 6 kg.

In the box

  • ›  GX2440 industrial charger
  • ›  AC cable
  • ›  DC cable with heavy-duty eyelets
  • ›  User guide, information guide and warranty

Technical data

Mains input voltage100-240 VAC, 50-60 Hz
Working voltage (AC)85-240 VAC, 50-60 Hz
Output power960 W max.
Efficiencyapprox. 92%
Charging current40 A
Battery voltage24 V
Battery chemistriesDeep-cycle lead-acid (wet, gel, MF, calcium, EFB, AGM) and lithium-ion (incl. LiFePO4)
Battery capacity55-425 Ah; maintains all battery sizes
Charging modesNORM 28.8 V · COLD/AGM 29.4 V · AGM+ 31.2 V · LI-ION 29.2 V · Repair 32 V (5 A)
Power supply mode27.2 V / 20 A
Back current drain< 5 mA
Operating temperature-20 °C to +50 °C
Storage temperature-40 °C to +70 °C
Housing protectionIP66
CoolingNatural convection
CablesRemovable AC and DC, 1.93 m each
Auxiliary portsInhibit (20 A relay) and remote LEDs
Dimensions (L x W x H)304 x 215 x 100 mm
Weight6 kg

  • Brand
    NOCO
  • Reference
    TB-NOCO-GX2440
  • MPN
    GX2440

noco-gx2440-ficha-tecnica.pdf

Download (1.24MB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Back to top