• New
GENIUSPRO25 NOCO · 25A workshop charger | telebaterias.com
GENIUSPRO25 NOCO · 25A workshop charger | telebaterias.com
GENIUSPRO25 NOCO · 25A workshop charger | telebaterias.com
GENIUSPRO25 NOCO · 25A workshop charger | telebaterias.com
GENIUSPRO25 NOCO · 25A workshop charger | telebaterias.com

GENIUSPRO25 by NOCO: 6/12/24V 25A professional charger with power supply mode

NOCO

One charger for 6, 12 and 24V batteries: 25A at 6/12V, 12.5A at 24V, plus a stable power supply mode for ECU work.

25A at 6/12V · 12.5A at 24V | Up to 1000Ah (6/12V) | 12V and 24V power supply | Lead-acid and LiFePO4 lithium | 3 m DC cable

Free quote, no obligation

Request a quote for your GENIUSPRO25 by NOCO: 6/12/24V 25A professional charger with power supply mode

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

GENIUSPRO25 by NOCO: 6/12/24V 25A professional charger with power supply mode

Can one unit look after the car, the van and the lorry? Yes, as long as their batteries are 6, 12 or 24V. The GENIUSPRO25 puts out 25A at 6 and 12V and 12.5A at 24V, covering up to 1000Ah at 6/12V and 500Ah at 24V.

What about lithium? It supports lithium batteries with a BMS, LiFePO4 included, as well as flooded, gel, MF, EFB, AGM and calcium lead-acid.

For workshop use it also acts as a 12 or 24V power supply while you programme or run diagnostics. There is a 5A mode for batteries up to 200Ah, repair modes at all three voltages and a force mode for batteries at 0V. Supplied with an EVA case, 3 m DC cable and a 30A ANL fuse.

Before you order, check

  • ›  Your batteries are 6, 12 or 24V: no other voltages are supported.
  • ›  Capacity: up to 1000Ah at 6/12V and 500Ah at 24V. Need more current? The GENIUSPRO50 gives 50A (25A at 24V).
  • ›  Chemistry: lead-acid or lithium with a BMS (LiFePO4).
  • ›  For ECU programming, the supply mode gives 25A at 12V and 12.5A at 24V.
  • ›  Not sure it fits your fleet or workshop? Give us a call and we will confirm the model before you order.

Features

  • ›  Charges 6V and 12V batteries at 25A and 24V batteries at 12.5A, with 375W output.
  • ›  Capacity up to 1000Ah at 6/12V and up to 500Ah at 24V.
  • ›  Chemistries: lead-acid (flooded, gel, MF, EFB, AGM, calcium) and lithium with BMS, LiFePO4 included.
  • ›  Power supply mode at 12V (25A) and 24V (12.5A) for programming and diagnostics.
  • ›  5A mode for batteries up to 200Ah or for maintenance.
  • ›  Repair at 6, 12 and 24V; detects from 1V, with force mode for 0V batteries.
  • ›  Nylon-braided silicone cables that stay flexible down to -40°C; 30A ANL fuse.
  • ›  100-240 VAC input; 236 x 130 x 76 mm, 1.22 kg.

In the box

  • ›  GENIUSPRO25 charger
  • ›  Clamps with interchangeable connectors
  • ›  3 m DC cable
  • ›  30 A ANL fuse
  • ›  2 self-tapping screws
  • ›  EVA case
  • ›  User guide

Technical data

Mains input voltage100-240 VAC, 50-60 Hz
Output power375 W max.
Charging current25 A (6V, 12V) / 12.5 A (24V)
Battery voltage6V, 12V and 24V
Battery chemistriesLead-acid (wet, gel, MF, calcium, EFB, AGM) and lithium with BMS (LiFePO4)
Battery capacity6/12V: up to 1000 Ah · 24V: up to 500 Ah; maintains all battery sizes
Charging modesLead-acid, AGM and Lithium (6/12/24V), Repair (6/12/24V), 12V and 24V Supply, 5 A mode and Force
Power supply mode12 V (25 A) / 24 V (12.5 A)
Low-voltage detection1 V (6V, 12V, 24V); Force Mode: 0 V
Back current drain< 0.5 mA
Operating temperature-20 °C to +50 °C
Housing protectionIP20
CoolingForced air
DC cable length3 m (8 AWG)
FuseANL 30 A
Approx. charging time (50% depth of discharge)6/12 V: 25 Ah: 0.75 h · 50 Ah: 1.5 h · 100 Ah: 3 h · 200 Ah: 6 h · 500 Ah: 15 h
Dimensions (L x W x H)236 x 130 x 76 mm
Weight1.22 kg

  • Brand
    NOCO
  • Reference
    TB-NOCO-GENIUSPRO25
  • EAN13
    1210000619518
  • MPN
    GENIUSPRO25

noco-geniuspro25-ficha-tecnica.pdf

Download (3.66MB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

16 other products in the same category

Back to top