• New
Lemania Energy T3 · 12V tester | telebaterias.com

T3 by Lemania Energy: 12V battery tester with QR code

LEMANIA

Fits in your palm: it tests 12-volt lead-acid or lithium batteries and, while it is at it, the vehicle starting and charging.

For 12 volts | Lead-acid: up to 2000 CCA | Lithium: up to 1000 CCA | Starting and charging | 1 metre of cable

Free quote, no obligation

Request a quote for your T3 by Lemania Energy: 12V battery tester with QR code

  • Reply in under 4 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Share

Frequently Asked Questions

insert_link

Buying a battery on telebaterias.com has the following advantages:

  1. First of all, the price. Buying a battery online is much cheaper than buying a battery in a physical store, mainly thanks to our high sales volume.
  2. On the other hand, at telebaterias.com we have commercial agreements with the main battery manufacturers. Thanks to our high turnover, our products are stored for a few days at the factory and reach our customers in the best possible condition. Our batteries therefore have the most recent date of manufacture.
  3. Finally, thanks to our professional technical advice, you can change your battery yourself at the best price
insert_link

To find out if a battery is suitable for my vehicle, the best thing to do is to contrast the characteristics of the battery we have installed with the one we are going to buy.

Battery technology.

First of all, we must check that the type of battery is compatible with the one we are going to buy. If the technology is special, it is usually indicated on the battery. Battery technology is especially relevant in vehicles equipped with a start-stop system.

Measurements.

It is very important that the battery enters the cabin prepared for installation. Keep in mind that the measurements of the batteries are the maximum measurements of the same with all its edges, with the height of the terminal, with the tab for fastening, etc ... Therefore, if you have the appropriate gap for the measurement battery, you will have no problem installing it. In many cases you will see that you have a larger gap to install a larger battery. In these cases, we recommend that you put the battery with the highest amperage that fits into the hole.

Arrangement of the terminals.

It is essential that the positive of the battery matches the location of the positive of the battery you have installed. The convention is to locate the positive being as close as possible to the terminals, since in some cases, the battery may have the terminals closest to the conductor and in other cases closer to the license plate.

However, if you look closely at the photo you can see if the positive of the battery matches the one you have.

In general, except for Asian, American or some off-road vehicles, it is normal for the positive to be on the right.

This is a general guide. However, if you have any questions, contact us and we will be happy to advise you on the most suitable battery for your vehicle.

T3 by Lemania Energy: 12V battery tester with QR code

Car will not start and you do not know if it is the battery? The Lemania Energy T3 will tell you: it rates how much cranking power a 12-volt battery has left, what condition it is in, and whether the starter and alternator are doing their job.

On lead-acid it reads 100 to 2000 CCA and on lithium 20 to 1000, and it understands SAE, DIN, EN, IEC, JIS, BCI, GB, CA, MCA and CCA. If a cell is failing, it flags it; you share the result with a QR code.

It has no battery of its own, so it is never flat when you need it, and it survives a reversed hook-up. LCD screen, four touch buttons, 80 x 80 x 22 mm, 0.2 kg and one metre of cable (the T4 has two).

Before you order, check

  • ›  Is the battery 12 volts?
  • ›  Lead-acid under 2000 CCA or lithium under 1000?
  • ›  Is one metre of cable enough, or would the T4 with two suit you?
  • ›  Want a paper report? That is the T11.
  • ›  Questions by phone: we will confirm whether the T3 is right for you.

Features

  • ›  Rates cranking power and condition of 12-volt batteries.
  • ›  Also checks the starter motor and alternator.
  • ›  Lead-acid 100 to 2000 CCA; lithium 20 to 1000 CCA.
  • ›  Standards: SAE, DIN, EN, IEC, JIS, BCI, GB, CA, MCA and CCA.
  • ›  Flags faulty cells and shares the result by QR.
  • ›  No internal battery; withstands reversed connection.
  • ›  LCD and four touch buttons; use between 0 and 50 °C.
  • ›  80 x 80 x 22 mm, 0.2 kg and 100 cm of cable.

Technical data

Voltage12V
Lead-acid range100-2000 CCA
Lithium range20-1000 CCA
StandardsCCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
TestsBattery, starting system and charging system
DisplayLCD
ResultsQR code
Reverse polarity protectionYes
Cable length100 cm
Operating temperature0 to 50 °C
Storage temperature-20 to 70 °C
Dimensions80 x 80 x 22 mm
Weight0.2 kg

  • Brand
    LEMANIA
  • Reference
    TB-LEMANIA-T3
  • MPN
    T3

lemania-t3-ficha-tecnica.pdf

Download (143.62KB)
Closed prices without surprises with VAT and shipping costs included! (Iberian Peninsula)
Delivery service in 24 hours! Receive your battery comfortably at home
Batteries with the latest date of manufacture

11 other products in the same category

Viewed products

Back to top